logo
HOME PROFILE PRODUCTS PARTNERS JOB REFERENCE CONTACT US
Marine Fire Dampers
   
Kyodo-Allied has created some of the most reliable and high quality Fire & Smoke Damper specially for marine use. It is suitable for use in extreme environmental conditions in offshore oil and gas, marine platform, cargo ships and vessel.

Our range of marine dampers are designed and build to meet the IMO FTP Code and SOLAS 74

We offered 3 range of fire dampers

  1. A60 Motorized Marine Fire Damper (Aerodynamic Blades)
  2. Manual/Electrical Marine Fire Damper
  3. Manual Marine Fire Damper



1. A60 Motorized Marine Fire Damper [Aerodynamic Blades]

Single Module Size

  • Minimum  : 150 mm x 150 mm

  • Maximum : 1,600 mm x 1,600 mm

Leakage Rate

  • 0.040m3/s/m2 at differential pressure of 2,000 Pa

  • 0.002m3/s/m2 at differential pressure of 50 Pa



2. Manual / Electrical Marine Fire Damper

 

The most significant characteristics of our Marine Type Fire Damper is that it comes with an electrical actuator, which enables rapid closing of the damper blade when an electric signal is sent. Once the damper blade is shut, the control system will send a message to inform the control tower. The Marine Fire Damper can be operated in three ways, the manual operation mode, the electrical operation mode and activation by thermal fuse unit.

Our Marine Type Fire Damper has attained DNV Quality System Certificate of Assessment.



 

2.1  Specification for Manual/Electrical Marine Fire Damper

 
  RECTANGULAR TYPE    
  Damper Size : 150<W<1000 (mm), 150<L<1000 (mm)
  Depth : D = 200 mm (Standard)
  Casing : 5.0mm thick mild steel sheet
  Blade : 3.2mm thick EG sheet
  Blade Shaft : SUS304, 2B
  Fire Rating : Class A-60 deck, IMO FTP Code Standard
  Fusible Link : 72 degree celcius
  Electrical Actuator : ADS-B101, ADM-B102
  Finish : Etching Primer Green



 
  ROUND TYPE    
  Damper Size : MIN=150mm Ø, MAX=700mm Ø
  Depth : D = 200 mm (Standard)
  Casing : 5.0mm thick mild steel sheet
  Blade : 3.2mm thick EG sheet
  Blade Shaft : SUS304, 2B
  Fire Rating : Class A-60 deck, IMO FTP Code Standard
  Fusible Link : 72 degree celcius
  Electrical Actuator : ADS-B101, ADM-B102
  Finish : Etching Primer Green

^ Top

2.2  Actuator for Manual/Electrical Marine Fire Damper
 
  GENERAL    
  Rated Voltage  :  DC 24V
  Operating Voltage  :  DC 18V - 30V
  Rated current  :  DC 24V
  Confirmation  :  Operation confirmation signal from built-in microswitch
  Contact Rating  :  DC 30V/2.0A
  Fusible Link  :  72 degree celcius
  Reset  :  Manual/ Electrical Reset

 

 

OPERATION METHOD

The damper is fitted with an electrical actuator which enables rapid closing of the damper blades. It can be operated in three ways.

 

[1] MANUAL OPERATION MODE
  [ Closing ]
Pull the MANUAL LEVER. This actuates the spring to release(ADS-B101) causing the damper blades to close momentarily.

 


Closed


[ Reset ]
Turn the MANUAL HANDLE counterclockwise until the indicator reaches position "O" on the scale, locking the damper blades.

 


Reset
[2] ELECTRICAL OPERATION MODE
  The electrical actuator closes/opens the damper blades rapidly once signal (DC 24V) is received from control centre. Once the damper is closed/opened, confirmation signal and reporting signal will be sent out immediately at any time.
   
[3] ACTIVATION BY THERMAL FUSE UNIT
  A temperature above 72 °C in the damper duct causes the temperature fuse to be melt. The shaft of the fusible link, in turn, unlock the fuse arm to activate the spring in the ADS-B101, thus causing the damper blades to close momentarily.

3. Manual Fire Damper (w/o DNV Certification)


 



A.  ORDER INFORMATION

 

  Manufacturer  :  Kyodo-Allied Industries Ltd, Singapore
  Distributor  :  Kyodo-Allied Technology Pte Ltd, Singapore
  Address  :  17,Kian Teck Road, Singapore 628771
  Contact person  :  Miss S N Yeh / Miss Cindy Pang / Mr Eric Tan
  Tel  :  (65) 6265-1311
  Fax  :  (65) 6265-8100
  E-MAIL  :  sinkyodo@singnet.com.sg

 
B.  OUR PROMISES
 
  Delivery within 7 working days or less for small quantity upon receipt of your T/T payment. We can arrange air or ocean shipment to you.

Please make your T/T payment to:

Kyodo-Allied Technology Pte Ltd
Account No: 101-908-435-9
United Overseas Bank Ltd (Main Branch)
80 Raffles Place, UOB Plaza 1 Singapore 048624

 

 
 
Headquarter (Singapore) - 17 Kian Teck Road, Singapore 628771 Tel: (65) 6265 1311 Fax: (65) 6265 8100
This site is best viewed on Internet Explorer 7 or Firefox 3 or Safari 5 and above.
Copyright © Kyodo-Allied Technology Pte Ltd. All Rights Reserved.
| Developed by Tradz Media International.